Engineering in progress

H2 ELECTRY

Creating green technology

We design hybrid energy concepts that generate, store, and control power so critical loads can continue when the grid goes down—and recharge from renewables or the grid when available.

Why this matters

Problems sites actually face

Organizations need electricity that stays available, manageable, and not dependent on a single source. These are the problems we are engineering against.

  • Continuity

    Grid interruptions stop offices, local IT, and security systems. Backup that is planned and controlled protects operations.

  • Cost and demand

    Energy use at the wrong time raises bills. Storage with a controller can shift when power is drawn from the grid.

  • Single-source limits

    Solar alone varies with weather and daylight. Combining wind, solar, storage, and optional grid top-up improves usefulness.

Approach

Generate → store → control → use

A clear energy path—not marketing claims. Each step is part of the concept we are developing.

  1. Generate

    Capture energy from wind and solar on the same structure.

  2. Store

    Hold energy in a battery for later use when generation is low or the grid fails.

  3. Control

    An energy controller protects the battery and decides charge and discharge safely.

  4. Use

    Supply critical loads in backup mode; top up from the grid when renewables are not enough.

Flagship concept

La Torre Energética

Under development — not for sale

A tree-inspired hybrid unit: aerogenerator and solar panels feeding a battery through an energy controller. When the grid is down, stored energy supports selected loads. When generation is insufficient, the system can charge from the normal electrical supply.

This is a real engineering concept in development at H2 ELECTRY. It is not a finished commercial product and no performance ratings are published here.

Conceptual diagram of La Torre Energética: wind, solar, controller, battery, grid top-up, and critical loads

Intended applications

Where this architecture can help

Possible uses of a hybrid generate-and-store system once developed—not current product offerings.

Office and local IT continuity

Keep critical office loads and local server or network equipment running during short grid failures.

Site resilience

Combine on-site generation with storage so a facility is less dependent on a single supply path.

EV charge support

Stored energy may later support electric vehicle charging at the site when generation and battery capacity allow.

Need factual information?

Ask about our Energy division work in progress. We answer through a dedicated contact channel.

Contact Energy